Ion® JSPII
Primary with Battery Backup System
1/3 HP cast iron as an everyday primary sump pump with a battery-operated secondary pump for automatic backup during power outages.
Comes fully assembled with pumps and valves pre-plumbed. Simply drops into sump pit for easy installing.
The Ion Switch operates primary pump with no moving parts or contact points. Runs on utility power with a pumping capacity rated at 44 GPM (at 10' of head).
Pairs with one 12-volt AGM battery (separate availability) to run DC backup pump when household electric supply becomes unavailable.
High output 8-amp charger unit with five stages. Built-in audible alarm and indicator lights for easy identifying of system status.
Installation Diagram
Included Components
- 8-amp battery charger
- Battery box
- Ion WC33i sump pump and Ion Switch
- 12-volt backup pump and backup switch
Supplemental Details
- Minimum basin size: 18″ diameter and 24″ deep
- Requires one 12-volt AGM battery (separate purchase) for operation during power outages
Ion WC33i Pump
1/3 HP Cast Iron
A heavy-duty primary sump pump engineered for sustaining pumping during normal day-to-day uses with continued operation availability when supply from utility power is unavailable.
- 1/3 HP pump rated at 44 GPM (at 10′ of head).
- Constructed with cast iron materials.
- High efficiency motor consumes nearly half the power of most pumps
- Also available for selection as an individual pump.
Ion Switch
Digital Level Control
Operates during primary pump runs. Enhanced functionality has no moving parts or contact points, eliminating common mechanical failure causes.
- Proprietary sensor and solid-state design pioneered for the residential market in 2010 with the original Ion Switch.
- Proven stationary switch is more reliable than mechanical switches. Its enhanced control helps extend pump service life.
- Built-in alarm warns end users of high water level threats ahead of possible flooding.
- Also available for selection as an individual switch.
Power+ AGM Battery
One 12-Volt Deep Cycle
Supports harsh sump environments and heavy pump use with an average service life that doubles standard backup pump batteries.
- One 12-volt Power+ battery supplies DC power to secondary pump during primary pump disruptions from power loss.
- True deep cycle battery withstands excessive depletions/charging.
- Comes fully charged and easy to install. End-user friendly.
- Not included with system. Available for individual battery selection from Ion Technologies product suppliers and installers.
Ion WC33i Pump
1/3 HP Cast Iron
A heavy-duty primary sump pump engineered for sustaining pumping during normal day-to-day uses with continued operation availability when supply from utility power is unavailable.
- 1/3 HP pump rated at 44 GPM (at 10′ of head).
- Constructed with cast iron materials.
- High efficiency motor consumes nearly half the power of most pumps
- Also available for selection as an individual pump.
Ion Switch
Digital Level Control
Operates during primary pump runs. Enhanced functionality has no moving parts or contact points, eliminating common mechanical failure causes.
- Proprietary sensor and solid-state design pioneered for the residential market in 2010 with the original Ion Switch.
- Proven stationary switch is more reliable than mechanical switches. Its enhanced control helps extend pump service life.
- Built-in alarm warns end users of high water level threats ahead of possible flooding.
- Also available for selection as an individual switch.
Power+ AGM Battery
One Deep Cycle Battery
Supports harsh sump environments and heavy pump use with an average service life that doubles standard backup pump batteries.
- One 12-volt Power+ battery supplies DC power to secondary pump during primary pump disruptions from power loss
- True deep cycle battery withstands excessive depletions/charging.
- Comes fully charged and easy to install. End-user friendly.
- Not included with system. Available for individual battery selection from Ion Technologies product suppliers and installers.
Specifications
| Maximum Capacity | Up to 45 GPM |
| Maximum Head | Up to 24‘ |
| Electrical Data | 115 V, 1 Ø, 4 FLA, 60 Hz |
| Motor Data | 1/3 HP, PSC, high efficiency motor with thermal overload protection, 3450 RPM |
| Recommended Minimum Basin Size | 18" x 24" |
| Materials of Construction | Cast iron and engineered thermoplastic |
| Impeller | Thermoplastic vortex |
| Power Cord | 10' Standard |
| Discharge | 1-1/2" NPT |
| Solids Handling | 1/2" |
Performance
- Primary pump with energy-efficient motor
- Piggyback Ion digital level control primary switch with no moving parts
- High quality 2100DC battery backup pump rated for 2,100 GPH
- Heavy duty adjustable vertical backup float switch for maximum reliability
- Solid-state 8 amp charger unit with 5 charging stages automatically switches to DC mode when power is out
- Uses one 12 volt deep cycle AGM battery (battery is NOT included)
- 1-1/2″ schedule 40 PVC piping
- Check valve on each pump and a combination valve on the main discharge
- 3 year warranty
Purchase Availability
Discover the various purchasing options for the Ion Technologies product line.
Locate Nearby Wholesalers
Shop & Delivery Convenience
Find Area Contractors