Ion^® Genesis

Smart Sensing Controller & Alarm

Operational pump control and key activity monitoring with integrated alarm. Runs one or two sump/sewage pumps, with dual pump alternating or simultaneous operating.

Equipped with two stationary digital sensors. Solid state sensing measures water level with the added benefits of redundancy and high water level detection.

Monitors crucial activity and detects irregularities. Audible/visual alarm notifies of abnormal amp draw, excessive run time, high water, and pump or sensor failure.

Accessible controller displays monitored conditions for end user analyzing. Easily adjust pump activation level without configuring inside sump/ejector pit.

Operates pumps without moving parts or contact points, the main contributors of mechanical failure. Enhanced control helps extend pump service life.

Ion 30ACi+ Sump Pump Backup AC Power System

Installation Components

Included with System

Power inverter/battery charger
Battery box
Ion WC33i Sump Pump
Ion+ Sensor Switch

Additional Notes

Also included are battery leads and two pipe mount brackets
One 12-volt Power+ AGM battery required
(sold separately via Ion Technologies supplier)
Sump pit not included

Ion WC33i Sump Pump

Full-Performance Emergency Backup

A full-service primary sump pump configured for system use as an emergency backup. Its high pumping capacity and solid cast iron construction gives it the strength to handle continuous/high water flows and the durability for day-to-day use.
Low 4.0 amp load maximizes runtime efficiency. Consumes power sparingly to lessen day-to-day utility use; prolongs battery availability in emergencies for extended runtime during power outages.
Heavy duty cast iron material withstands excessive, high demand use. Offsets wear and tear, extending service life.
Well equipped for continuous or high water flows. High water removal efficiency offsets flood risks to keep basements dry, day-to-day and during emergencies.

Power Outages
Mechanical Failures

Power Outages

Converts DC Battery Power to Standard AC Electricity

dual-source-ac-backup-sump-pump-powering-from-converted-battery-05

- - Immediately detects when house electric becomes unavailable. Heavy-duty power inverter automatically converts DC battery power from one 12-volt Power+ AGM (sold separately) to 120-volt standard AC electricity to fully run the system pump.
  - Maintains its high rated pumping capacity through from onset through full duration of use to push out water and keep the basement dry during power outages. Sustains full performance until battery is completely depleted.
  - Low amp pump draw consumes half the power of conventional pumps to save battery and extend runtime. Power+ AGM’s 100 amp draw capacity offers nearly twice the amount of power of typical marine batteries.
  - Power inverter’s built-in charger powers battery back to 100 percent once house electric returns. Stays fully charged for when the next outage occurs.

Mechanical Failures

Runs off House Electricity, Avoids Unnecessary Battery Use

dual-source-ac-backup-sump-pump-powering-from-house-utility-05

- - Activates the system pump once water in the sump pit reaches a specific level, presumingly as a result of a mechanical failure to an existing primary sump pump.
  - Runs off house electric, completely bypassing the battery and avoiding unnecessary use as long as utility power remains available.
  - Continues running as needed while maintaining its high rated pumping capacity. Leaves reasonably ample time for servicing or replacing of the inoperable primary.
  - Consumes battery only when house electric becomes unavailable. Ensures battery stays at 100 percent and fully charged for backup use when the next outage occurs.

Ion+ Sensor Switch

Stationary Control & High Water Detection

Piggyback style sensor digitally detects sump pit water level and electronically turns system pump on/off per configured set point.
No moving parts or contact points, eliminating concern over mechanical failures and consequential flooding. The stationary sensor’s heavy-duty construction and multipoint sealing mechanism is designed for withstanding harsh sump and sewage environments.
Integrated high water alarm notifies when water in the sump pit reaches the high level set point. Its audible buzzer alerts end users of the problem scenario, allowing opportunity to prevent a potential flood.
Color indicators show the status of utility power, system pump, and high water for easy identifying, even in dark basement environments.
Digital level control technology provides superior performance and reliability when compared to mechanical pump switches. The proven success of our proprietary solid-state sensing was introduced in 2010 with the original Ion Sensor Switch.