Ion^® Genesis

Smart Sensing Controller & Alarm

Controls one or two pumps, with alternating and simultaneous run support. Plug-and-play setup eases installation in residential sump and sewage applications.

Heavy-duty smart sensors operate without moving parts. Regulates pumping using available data from dedicated level control sensor, with ready redundancy from secondary high water sensor.

Intuitive display allows end users to monitor pumping performance and conditions from mounted controller, with availability for real time detection alerts from built-in audible alarm.

Manually adjust water level setpoint from controller. End users can customize pump turn on with precise flexibility, from 2.5” to 72” in half-inch increments.

Multi-point sealing mechanism supersedes single surface seals to thoroughly protect internal sensor components in harsh sump or sewage environments.

Ion Genesis Smart Sensing Controller & Alarm

Operation Manual

Sales Brochure

Where to Buy

Typical Installation Components

Ion Genesis
Pump outlets
Power cord
High water sensor
Digital level sensor
Pumps (not included)

Ion Genesis Pump Controller Installation

A Closer Look at the Pump Controller

LED Indicators:
Displays pump(s), power, and alarm statuses.
LCD Screen:
Shows equipment data and alarm notifications.
Plug & Play Outlets:
Pump(s) plug into controller in place of wall outlet.
Ion® Digital Level Sensor:
Communicates water levels to controller.
Ion Digital High Water Sensor:
Detects high water and functions as secondary level sensor in case primary sensor fails.
Remote Alarm Contact:
Connects to an external property security system.
Silence/Reset:
Test run pump(s) without having to access basin.
On Level:
Manually adjust pumping turn on level from 2.5” to 72” in 0.5” increments.

Specifications

Solid-state sensing technology with no moving parts or contact points
Equipped with dedicated level control sensor and secondary high water level sensor with available backup level control functionality
Redundancy of two sensors offsets disruption in the unlikely circumstance of main sensor failure
Multipoint sealing mechanism that supersedes single surface seals
Voltage: 120 VAC, 60 Hz
Output Capacity (per outlet): 1/2 HP, 12 FLA,
15 amp max, 72 LRA
Remote Alarm Contacts: Normally closed (open
during alarm state) 30 V/DC @ 1 amp max
Temperature Range: 32º F to 104º F (0º C to 40º C)
Audible Alarm: 80 dB @ 10 ft.
Enclosure: NEMA-1 UL94V-0 ABS
Mounting Hardware (controller): (4) #10 Screws
(not included)
Mounting Dimensions (controller): 8.25” X 3.5”
Sensors available with 10’ or 20’ cords
3 year warranty
Part Number: iNG20503